CTLGFVER
$$VER:2 cycas.catalog 1.1 (17.06.98)
english
Angle/1st Direction point:
Position of dimension:
Measuring point:
Start point:
Move/End point:
Select dimension:
Select dimension figure:
Height:
Value:
Size:
Safety-Request:
YThe dimension chain will be reverted to its original state.
Are you sure you want this?
Original|Cancel
	Distance:
The text size was not defined !
Start point:
Text:
Select text line:
Width:
1Cycas 1.78              File: %s       Layer: %s
1st Point:
2nd Point:
Error:
	Pen: %d*
Line type: %d*
Length: %8.4f*
Length: %8.2f*
Length: %8.1f*
Angle: %8.4f*
Angle: %8.4f*
Circle
Radius: %8.4f*
Radius: %8.2f*
Radius: %8.1f*
Ellipse
X Radius: %8.4f*
X Radius: %8.2f*
X Radius: %8.1f*
Y Radius: %8.4f*
Angle: %8.4f*
Angle: %8.2f*
Size [mm]: %8.1f*
	Font: %s
Dimension chain
Points: %ld*
	Pen: ---*
Line type: ---*
Opening
Window
Base: %8.4f*Height: %8.4f*
Base: %8.4f*Height: %8.2f*
Base: %8.4f*Height: %8.1f*
Width: %8.4f*
Width: %8.2f*
Width: %8.1f*
Base: %8.2f*Height: %8.2f*
Base: %8.1f*Height: %8.1f*
Length: %8.4f*Thickness: %8.4f*
Length: %8.2f*Thickness: %8.2f*
Length: %8.1f*Thickness: %8.1f*
Material: %s*
Base: %8.4f*
Base: %8.2f*
Base: %8.1f*
Height: %8.4f*
Height: %8.2f*
Height: %8.1f*
Factor:%8.2f*
Pattern
Spline
3D-Line
3D-Element
Element: %s*
%s%s%s%s%s%s%s%s%s
Element information:
Which font? [0..5]
Impossible!
Which font? [0..5]
Not opened!
No printer.device opened
No CreateExtIO
No CreatePort
	Request:
Output to printer?
Yes|No
%Printing.... %3d%%        Cancel: ESC
	Error: %s
&Printing.... %3ld%%        Cancel: ESC
No ColorMap
	No Grid
+Drawing Scale: %.1f
Printing Scale: %.1f
Please check......
	OK|Cancel
Origin:
Not enough memory !
Untitled.DXF
Untitled.SYM
Untitled.CYC
Untitled.LWOB
Untitled.EPS
	Layer %ld
;Caution:*Undo-memory overflow. You cannot undo this action!
;Caution:*Undo-memory overflow. You cannot undo this action!
You cannot undo this action!
CONTINUOUS
SHORT DASHES
DASHED
DASH-DOTTED
Save DXF-file...
LTYPE
AUSGEZOGEN
____________________________________________
LTYPE
GESTRICHELT
__ __ __ __ __ __ __ __ __ __ __ __ __ __ __
-0.25
LTYPE
KURZGESTRICHELT
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
0.375
-0.125
LTYPE
STRICHPUNKT
__ . __ . __ . __ . __ . __ . __ . __ . __ . _
-0.25
-0.25
LAYER
AUSGEZOGEN
LAYER
AUSGEZOGEN
LAYER
AUSGEZOGEN
LAYER
AUSGEZOGEN
LAYER
KURZGESTRICHELT
LAYER
KURZGESTRICHELT
LAYER
KURZGESTRICHELT
LAYER
KURZGESTRICHELT
LAYER
STRICHPUNKT
LAYER
STRICHPUNKT
LAYER
STRICHPUNKT
LAYER
STRICHPUNKT
LAYER
GESTRICHELT
LAYER
GESTRICHELT
LAYER
GESTRICHELT
LAYER
GESTRICHELT
Could not access file !
This is a demo version !
HIDDEN
	SEPARATE
CENTER
PHANTOM
Load DXF file...
Could not access file !
Output:
Message before changing pen?
Pen-Change No.1
Pen-Change No.2
Pen-Change No.3
Pen-Change No.4
Could not print file !
This is a demo version!
LWOB output mode
Export which elements?
All data|Visible data|Select
Reference point:
9This is a demo version!
Output is limited to 20 elements!
Save EPS file...
)You cannot export from the demo version !
Load HPGL file...
Output mode:
%Choose layer to store the results in:
)Active Layer|Choose Layer|Delete Results
Output layer: [0-99]
%Working.... %3d%%        Cancel: ESC
%Working.... %3ld%%        Cancel: ESC
Polygon point:
1st Corner point:
Move/2nd Corner point:
Select pattern:
Space:
?Do you really want to dissolve
the pattern into single lines ?
Dissolve|Cancel
Layers
Snap points:
Gauge
Aspect ratio
Opening
Plotter
Printer
Preferences
Numeric format
Dimension chains
Undo memory
Filter preferences
	Message:
Registration:
Project
Symbol
Drawing
-Load
-Save
Preferences
Scale:
Gable wall
Ceiling
Pillar
Round pillar
	Stairway
Profile
	Material
Alter
Delete
	Parallel
Orthogonal
Frame
	N-Polygon
Attach
Extend
Erase
Delete-Part
	Cut with
-Axis
-Side
-Angle
Connect
	Separate
Alter height
Alter
	-Opening
-Door
-Window
-Height
	Dissolve
Remove
-Delete
Library
Group
-Create
	-Ungroup
	Clipboard
-Copy
-Paste
-0 Degrees
-90 Degrees
Format:
	-Content
-Format
-Size
-Style
-0 Degrees
-90 Degrees
Height
+ Point
- Point
-Value
-Move
-Size
-Style
	Original
Target
Hidden
Polygon
Prism
Cuboid
	-3 Point
-Point
-Frame
	-Dissolve
Input
	-Polygon
-Range
	-Pattern
-Angle
-Space
-Origin
-Description
-Number
-Factor
-Height
-Inscription
	-Position
-Multi
Series
-Polar
Rotate
Mirror
Stretch
-Line
Select:
Active
Passive
Switch
Range
Element
Point
Filter
Cancel
Device/Filename
Start sequence
End sequence
Paper width [cm]
Paper height [cm]
Scale
Resolution [cm]
0 Deg.*90 Deg.
Center*B.Left
Paper width [cm]
Paper height [cm]
Style:
Space
Character:
Width
X distance
Y distance
Z distance
Length
Angle
Width [cm]
Height [cm]
Snap-to range
End points
Points of intersection
Center points
Text points
Circle center
Arc start/End points
Circle Intersections
Polygon points
Measuring points
View:
Exact circles
Exact line thickness
Exact line types
All colored black
Show:
Guide points
Rooms
Filter by:
Pen*Line*Pen+Line
W. WEIDNER
VERLAG ANJA C. FRESE
NAME, COMPANY
SERIAL NUMBER
Link to elements:
OFF*ON
Move figures:
Numeric input:
M*CM*MM*INCH*FEET
Angle input
RAD*DEG
Undo memory [KB]
	Figures:
Line:
HLine
ARCH*M*CM*MM*INCH*FEET
Line*Circle
Wall thickness
Height
Factor
Description
Number
Volume
	1st Line:
	2nd Line:
Opening
Stop:
Depth
Window
	Load-Part
	Save-Part
	Load-DXF
	Save-DXF
Paste
Output
-Preferences
Print
Export-LWOB
Export-EPS
	GUI-Setup
Screenmode
Palette
	-Original
	Drawings
Symbols
Numeric format
Undo memory
Cycas 1.78  (c) 1997, 1998 Verlag Anja C. Frese
by Wolfgang Weidner
Free Memory: %ld
Elements in Memory:
Lines: %ld
Circles: %ld
Text: %ld
Dimensions: %ld
Walls: %ld
Splines: %ld
Hatches: %ld
3D-Lines: %ld
3D-Elements: %ld
Rooms: %ld
Total: %ld
Information...
Select function:
3The drawing was changed!
Really delete everything?
Delete|Save Drawing|Cancel
Quit|Save Drawing|Cancel
5The Drawing was changed !
Really delete everything?
Delete|Cancel
Path:
Path:
Path:
Select Room:
Text start point:
Room description:
Room number:
1st Corner point:
Move/2nd Corner point:
Description:
Number:
Factor:
Base:
Overwrite existing file?
Overwrite|Cancel
'Could not save dialog box preferences !
Save preferences...
'Could not load dialog box preferences !
Load preferences...
Save drawing...
Save symbol...
Could not save symbol file !
Load symbol...
	Error SYM
File format Error...
Angle/Direction point:
Could not load symbol file !
Clipboard is empty !
Load drawing...
Could not open ASC-file !
Could not load file-ID !
New library...
!Could not create symbol library !
Delete library...
!Could not delete symbol library !
Delete symbol...
Could not delete symbol file !
Could not load font !
Save drawing part...
.part
Load drawing part...
Number of divisions:
1st Element:
2nd Element:
Move to X- :
Move to X+ :
Move to Y- :
Move to Y+ :
Move to Z+ :
Move to Z- :
Move to Z:
Move/Confirm:
Move/2nd Direction point:
Center:
Radius/Circle point:
Move/Start point:
1st Circle point:
Move/2nd Circle point:
Move/3rd Circle point:
Move/Corner point:
Move/1st Point:
Move/2nd Point:
Select Circle/Arc:
Select Spline:
-Really dissolve the spline into single lines?
Inital Circle/Arc:
Select Side:
Through point:
%s dialog box: %d
Layer  %ld - %ld
	Measured:
Screen ratio:
Snap-to points:
Printer setup:
Plotter setup:
Undo setup:
Numeric format:
Dimension chain preferences:
Filter preferences:
Invalid layer found !
Not enough free memory !
Select wall:
Direction:
Outer side:
	Doorleaf:
5Really dissolve opening-symbol into single elements?
Move/Start point:
Target point:
Number:
Center:
Rotation axis 1st point:
Move/2nd Point:
Angle:
	Z Offset:
Mirror axis 1st point:
Mirror plane 1st point:
Move/3rd Point:
Fixed point:
X factor/Start point:
	Y factor:
	Z factor:
View:
	From/To:
Select opening:
Range:
	Element:
Group:
Length:
Radius:
	1st Line:
	2nd Line:
Select line of intersection:
Select line:
Select line segment:
Select end of line:
Select line:
End point:
Number of divisions:
Height of eye:
Height of target:
	Material:
ominus: No way!
	1st Wall:
	2nd Wall:
%Walls have to have of the same color.
!Wall thickness was not defined !
Length/End point:
Select line:
Select end of wall:
From:
Save...
Initial line:
Number of corners:
	Palette:
Green:
Blue:
Error:
Could not open Exec Lib !
Could not open Diskfont Lib !
Could not open Intuition Lib !
Could not open GadTools Lib !
Could not open Gfx Lib !
Could not open Asl Lib !
Could not load font !
Could not find Pubscreen !
Could not find Visual-Info !
Window not opened! 
DWindow not opened! 
No Menu! 
No Layout 
No MenuStrip 
Please close all windows !
Sreenmode:
Font:
Height of wall:
Height of gable wall:
	Diameter:
	Position:
Thickness:
Width:
Steps height:
Nosing:
Number of steps:
Number of monials:
Number of transoms:
Glass
%.2f m2
%.2f m3
15 Openings are maximum!
Pattern*Points